
B-2
B.2 Configuring the 9135 or 9140 for SLIP
Connect a DCE to DTE serial modem cable between the 9135 or 9140 Switch and the PC or terminal.
Perform the following steps:
Step 1 Open a HyperTerminal session as discussed in Section 5. Enter the Main Menu screen as shown
in Figure B-2.
Figure B-2. Main Menu Screen.
Step 2 Enter "System," "SLIP Port Settings." See Figure B-3.
Figure B-3. SLIP Port
Settings.
Formatted
Formatted
Deleted:
Komentáře k této Příručce