Canoga-perkins 9175 Command Reference Uživatelský manuál Strana 564

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 790
  • Tabulka s obsahem
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 563
CanogaOS Command Reference
31-25
Command Syntax
(no)trust (dscp|cos|ip-prec|port|outer)
trust: set trust value for the class
dscp: trust dscp value in classified packets
cos: trust cos value in classified packets
ip-prec: trust ip precedence in classified packets
port: trust port default cos value in classified packets
outer: trust the outer header of tunnel to map to priority in classified packets
Command Mode
Config-pmap-c mode
Usage
This command is used to set trust value for the class.
Examples
Switch(config)#policy-map pm1
Switch(config-pmap)#class cm1
Switch(config-pmap-c)#trust cos
Related Commands
None
31.37 set priority color
Use this command to set priority and color of traffic matching this class-map.
Command Syntax
(no)set priority <0-63> color (red|yellow|green)
priority: Specify the priority for matching class-map
color: Specify the color for matching class-map
Command Mode
Config-pmap-c mode
Usage
This command is used to set priority and color of traffic matching this class-map.
Examples
Switch(config)#policy-map pm1
Switch(config-pmap)#class cm1
Switch(config-pmap-c)#set priority 34 color red
Switch(config-pmap-c)# no set priority color
Related Commands
Zobrazit stránku 563
1 2 ... 559 560 561 562 563 564 565 566 567 568 569 ... 789 790

Komentáře k této Příručce

Žádné komentáře