Canoga-perkins 9175 Command Reference Uživatelský manuál Strana 177
- Strana / 790
- Tabulka s obsahem
- KNIHY
Hodnocené. / 5. Na základě hodnocení zákazníků
CanogaOS Command Reference
11-5
Command Syntax
ethernet oam link-monitor frame threshold high HIGH_THRES|none low LOW_THRES window
WINDOW
no ethernet oam link-monitor frame threshold high|low|window
none No high threshold value is set
HIGH_THRES Value of the high threshold for errored frames in the range of <1-65535
LOW_THRES Value of the low threshold for errored frames in the range <0-65535>
WINDOW Size of frame event window, expressed in milliseconds, in multiples of 100, in the
range <100-600> s
Command Mode
Interface mode
Default
The default value for high threshold is none, meaning that no high threshold is configured.
The default value of low threshold is 1.
The default value for the frame event window is 100.
Examples
Switch# configure terminal
Switch (config)# interface eth-0-1
Switch (config-if)# ethernet oam link-monitor frame threshold high 5 low 2 window 200
11.8 ethernet oam link-monitor frame-seconds threshold
Use this command to configure the low and high threshold and the window for the
frame-seconds event. If the low threshold is exceeded, an errored-frame-seconds link
event is generated. If the high threshold is exceeded then action defined through the
command ethernet oam link-monitor high threshold action will be taken
Command Syntax
ethernet oam link-monitor frame-seconds threshold high HIGH_THRES|none low
LOW_THRES window WINDOW
no ethernet oam link-monitor frame-seconds threshold high low window
HIGH_THRES High threshold for the number of errored frame-seconds in the range of
<1-900>
LOW_THRES Low threshold for the number of errored frame-seconds <1-900>
- Model 9175 1
- Table of Content 5
- CanogaOS Command Reference 10
- 1 Preface 29
- 1.4 Related Publications 30
- 1.5 Obtaining Documentation 30
- 2.1 User EXEC Mode 32
- 2.2 Privileged EXEC Mode 32
- 2.4 config-vlan Mode 33
- 2.5 VLAN Configuration Mode 33
- 2.6 Line Configuration Mode 34
- 3 General Commands 35
- 3.3 enable 36
- 3.4 end 37
- 3.5 exit (global) 37
- 3.6 exit (EXEC) 38
- 3.7 hostname 39
- 3.8 quit 39
- 3.9 terminal length 40
- 3.11 cipher detect 41
- 3.12 enable password 42
- 3.13 enable secret 43
- 4 Interface Commands 45
- 4.3 exec-timeout 46
- 4.4 exit(global) 46
- 4.5 line-password 47
- 4.6 login 48
- 4.7 privilege 48
- 4.8 bandwidth 49
- 4.9 clear counters 50
- 4.10 description 50
- 4.11 duplex 51
- 4.12 interface 52
- 4.13 jumboframe 52
- 4.14 management ip address 53
- 4.15 shutdown 53
- 4.16 speed 54
- 4.17 switchport 55
- 4.19 show transceiver 56
- 4.21 show interface 58
- 4.22 show interface status 59
- 4.32 storm-control 66
- 5 LACP Commands 68
- 5.3 lacp timeout 69
- 5.4 lacp system-priority 69
- 5.7 show lacp internal 75
- 5.9 show lacp neighbor 79
- 5.11 show channel-group port 83
- 5.12 show lacp counters 88
- 5.13 show lacp sys-id 89
- 5.14 clear lacp counters 89
- 6 VLAN Commands 91
- 6.3 vlan <1-4094> 92
- 6.4 vlan VLAN_LIST 92
- 6.5 show vlan 93
- 6.6 show vlan all 94
- 6.7 show vlan brief 94
- 6.9 vlan classifier activate 95
- 6.10 vlan classifier group 96
- 6.16 switchport access vlan 100
- 6.17 switchport mode access 100
- 6.18 switchport mode trunk 101
- 6-12 102
- 7 Spanning-tree Commands 104
- 7.5 spanning-tree hello-time 106
- 7.6 spanning-tree max-age 107
- 7.7 spanning-tree max-hops 108
- 7.12 spanning-tree port 111
- 7.17 spanning-tree edgeport 114
- 7.29 instance 121
- 7.30 region 122
- 7.31 revision 123
- 7.34 show spanning-tree 124
- 7.35 show spanning-tree all 125
- 7.39 show spanning-tree mst 129
- Related Commands 136
- 8 ERPS Commands 137
- 8.4 erps ring level 139
- 8.5 erps ring mode 140
- 8.7 erps ring edge-mode 142
- 8.9 erps ring srpt 144
- 8.10 erps ring enable 145
- 8.11 erps enable 146
- 8.12 show erps 147
- 8.13 show erps list 148
- 9 QinQ Commands 149
- 9.3 show vlan mapping table 150
- 9.4 switchport mode 150
- 9.11 dot1q ethertype 154
- 9.14 l2protocol-tunnel stp 155
- 9.15 l2protocol-discard stp 156
- 9.17 vlan dot1q tag native 156
- 9.18 show dot1q ethertype 157
- 10 Ethernet CFM Commands 158
- 10.11 CFM loopback tests 164
- 10.12 CFM linktrace tests 165
- 10-14 171
- 11 Ethernet OAM Commands 173
- 11.2 ethetnet oam mode 174
- 11.3 ethernet oam min rate 174
- 11.4 ethernet oam max-rate 175
- 11.14 ethernet oam timeout 181
- 12 IP Addressing Commands 183
- 12.2 ip icmp error-interval 184
- 12.3 router-id (global) 184
- 12.4 clear ip route static 185
- 12.5 ip route 186
- 12.6 show ip route 186
- 12.7 show ip route database 187
- 12.8 show ip protocols 188
- 13 ARP Commands 190
- 13.3 clear arp-cache 191
- 13.4 show ip arp 192
- 13.5 show ip arp summary 193
- 14 RIP Commands 194
- 14.3 distance (RIP) 195
- 14.4 ip rip authentication 196
- 14.6 ip rip receive version 198
- 14.7 ip rip receive-packet 198
- 14.8 ip rip send version 199
- 14.9 ip rip send-packet 200
- 14.10 ip rip split-horizen 200
- 14.11 network (RIP) 201
- 14.12 neighbor (RIP) 202
- 14.13 offset-list (RIP) 203
- 14.15 redistribute (RIP) 204
- 14.16 router rip 205
- 14.17 timers basic (RIP) 206
- 14.18 show ip rip database 207
- 14.19 show ip rip interface 207
- 14.20 version (RIP) 208
- 15 OSPF Commands 210
- 15.2 area Default-cost 211
- 15.3 area filter-list 212
- 15.4 area range 213
- 15.5 area stub 214
- 15.6 area virtual-link 215
- 15.7 auto-cost 216
- 15.8 clear ip ospf 217
- 15.9 compatible rfc1583 218
- 15.11 default-metric (OSPF) 219
- 15.12 distance (OSPF) 220
- 15.13 distribute-list (OSPF) 221
- 15.16 ip ospf cost 224
- 15.18 ip ospf dead-interval 225
- 15.19 ip ospf disable all 226
- 15.22 ip ospf mtu 228
- 15.23 ip ospf mtu-ignore 229
- 15.24 ip ospf network 230
- 15.25 ip ospf priority 231
- 15.28 neighbor (OSPF) 233
- 15.29 network area (OSPF) 234
- 15.31 redistribute (OSPF) 236
- 15.32 router-id (OSPF) 237
- 15.33 router ospf 238
- 15.34 summary-address (OSPF) 238
- 15.35 show ip ospf 239
- 15.37 show ip ospf database 241
- 15.39 show ip ospf neighbor 243
- 15.41 timers spf 245
- 16 BGP Commands 246
- 16.2 aggregate-address 247
- 16.3 bgp always-compare-med 247
- 16.7 bgp bestpath med 250
- 16.9 bgp cluster-id 251
- 16.12 bgp dampening 253
- 16.15 bgp deterministic med 255
- 16.16 bgp enforce-first-as 256
- 16.19 bgp router-id 258
- 16.20 bgp scan-time 258
- 16.21 clear bgp * 259
- 16.23 clear bgp ASN 260
- 16.24 clear bgp external 260
- 16.25 clear bgp peer-group 261
- 16.26 clear ip bgp * 261
- 16.30 clear ip bgp ASN 264
- 16.31 clear ip bgp external 265
- 16.33 clear ip bgp vrf 266
- 16.34 debug bgp 266
- 16.35 distance 267
- 16.36 exit-address-family 268
- 16.38 ip community-list 269
- 16.43 mpls-resolution 273
- 16.44 neighbor activate 274
- 16.51 neighbor description 278
- 16.53 neighbor ebgp-multihop 280
- 16.54 neighbor filter-list 280
- 16.56 neighbor next-hop-self 282
- 16.58 neighbor passive 283
- 16.61 neighbor prefix-list 285
- 16.62 neighbor remote-as 286
- 16.66 neighbor shutdown 289
- 16.69 neighbor timers 290
- 16.71 neighbor update-source 292
- 16.72 neighbor version 293
- 16.73 neighbor weight 293
- 16.74 network 294
- 16.76 synchronization 296
- 16.77 router bgp 296
- 16.78 show debugging bgp 297
- 16.79 show ip bgp 297
- 16.81 show ip bgp cidr-only 298
- 16.82 show ip bgp community 299
- 16.85 show ip bgp dampening 300
- Command Mode 301
- Examples 301
- Command Syntax 301
- 16.88 show ip bgp neighbors 302
- 16-58 303
- 16.89 show ip bgp paths 304
- 16.92 show ip bgp regexp 305
- 16.93 show ip bgp scan 306
- 16.94 show ip bgp summary 306
- 16.95 show ip bgp view 307
- 16.98 show ip bgp vpnv4 309
- 16.100 show ip protocols 310
- 16.101 timers 311
- 16.102 undebug bgp 311
- 17 VRRP Commands 313
- 17.2 authentication mode 314
- 17.3 interface (VRRP) 314
- 17.4 preempt-mode 315
- 17.5 priority (VRRP) 316
- 17.6 router vrrp 316
- 17.7 track (VRRP) 317
- 17.8 virtual-ip 318
- 17.9 show vrrp 319
- 18.1 IP SLA MONITOR 320
- 18.3 FREQUENCY 321
- 18.4 TIMEOUT 322
- 18.5 THRESHOLD 322
- 18.6 VRF 323
- 18.7 IP SLA MONITOR SCHEDULE 324
- 18.8 SHOW IP SLA MONITOR 324
- 18.11 TRACK RTR STATE 326
- 18.12 TRACK 327
- 18.13 DELAY UP 328
- 18.14 DELAY DOWN 328
- 18.15 SHOW TRACK 329
- 18.16 TRACK 330
- 18.17 SHOW VRRP 330
- 19 Route-map Commands 332
- 19.2 match as-path 333
- 19.3 match community 334
- 19.4 match interface 335
- 19.5 match ip address 336
- 19.7 match ip next-hop 338
- 19.9 match local-preference 340
- 19.10 match metric 341
- 19.11 match origin 342
- 19.12 match route-type 343
- 19.13 match tag 344
- 19.14 set aggregator 345
- 19.15 set as-path 346
- 19.16 set atomic-aggregate 347
- 19.17 set comm-list delete 348
- 19.18 set community 348
- 19.19 set dampening 350
- 19.20 set extcommunity 351
- 19.21 set ip next-hop 352
- 19.22 set local-preference 353
- 19.23 set metric 353
- 19.24 set metric-type 354
- 19.25 set origin 355
- 19.26 set originator-id 356
- 19.27 set tag 357
- 19.28 set vpnv4 next-hop 358
- 19.29 set weight 359
- 19.30 show route-map 360
- 20 VRF Commands 361
- 20.2 show ip vrf 362
- 20.4 ip route vrf 363
- 20.5 arp vrf 364
- 20.6 show ip arp vrf 365
- 20.7 clear ip arp vrf 365
- 20.8 ping vrf 366
- 20.9 traceroute vrf 366
- 21 IGMP Commands 368
- 21-2 369
- 21.5 ip igmp limit 370
- 21.6 ip igmp mroute-proxy 371
- 21.7 ip igmp proxy-service 371
- 21.8 ip igmp querier-timeout 372
- 21.9 ip igmp query-interval 373
- 21-7 374
- 21.12 ip igmp version 375
- 21.14 ip multicast-routing 376
- 21.15 show ip igmp groups 376
- 21.17 show ip mroute 377
- 21.18 show ip mroute-rpf 379
- 21.19 show ip mvif 379
- 22 IGMP Snooping Commands 381
- 22.10 ip igmp snooping vlan 386
- 22.11 show ip igmp snooping 387
- 22-8 388
- <1-4094>: the vlan id 389
- 23 MVR Commands 390
- 23.3 mvr group 391
- 23.4 mvr source-address 391
- 23.5 mvr type 392
- 23.6 show mvr 392
- 23.7 show mvr interface 393
- 23.8 show mvr group 394
- 23.9 show mvr group static 394
- 24 PIM Commands 396
- 24.3 ip pim bsr-candidate 397
- 24.4 ip pim bsr-border 397
- 24.5 ip pim dr-priority 398
- 24.6 ip pim exclude-genid 399
- 24.7 ip pim hello-interval 399
- 24.9 ip pim jp-timer 400
- 24-6 401
- 24.15 ip pim rp-address 404
- 24.16 ip pim rp-candidate 405
- 24-11 406
- 24.20 ip pim sparse-mode 407
- 24.21 ip pim unicast-bsm 408
- 24-16 411
- 25 LDP Commnands 413
- 25.2 clear ldp session 414
- Switch# clear ldp statistics 415
- 25.5 control-mode 416
- Switch# configure terminal 417
- Switch(config)# router ldp 417
- Switch# debug ldp all 418
- Switch# debug ldp dsm 419
- 25.9 debug ldp events 420
- 25.10 debug ldp fsm 421
- 25.11 debug ldp hexdump 422
- Switch# debug ldp hexdump 423
- Switch# debug ldp packet 423
- 2002/06/18 11:43:23 LDP: 423
- Switch# debug ldp qos 425
- Switch# debug ldp tsm 426
- Switch# debug ldp vc events 427
- Switch # configure terminal 427
- 25.26 ldp keepalive-timeout 435
- 25.32 show debugging ldp 439
- 25.33 show ldp 440
- 25.34 show ldp adjacency 441
- 25.36 show ldp downstream 442
- 25.38 show ldp interface 444
- 25.39 show ldp lsp 445
- 25.41 show ldp session 447
- 25.42 show ldp statistics 449
- 25.44 show ldp upstream 451
- 25.45 show memory ldp 452
- Switch# configure router 457
- 26 MPLS Commands 459
- 26.12 show mpls ftn-database 468
- 26.14 show mpls ilm-database 470
- 26.16 show mpls interface 471
- Codes: > - selected ILM 473
- 26.19 show mpls statistics 474
- 26.20 show mpls 475
- 26.21 clear mpls statistics 476
- 27 BGP VPN Commands 477
- 27.3 debug bgp mpls 478
- 27.4 exit-address-family 479
- 27.5 neighbor activate 479
- 27.6 neighbor allowas-in 480
- 27.8 neighbor as-override 481
- 27.9 neighbor description 482
- 27.10 neighbor remote-as 482
- 27.12 neighbor shutdown 484
- 27.13 neighbor soo 484
- 27.14 redistribute 485
- 27.15 route distinguisher 485
- 27.16 route-target 486
- 27.17 show ip bgp vpnv4 487
- 27.18 show ip vrf 488
- 28 Route-map Commands 489
- 28.2 match as-path 490
- 28.3 match community 491
- 28.4 match interface 492
- 28.5 match ip address 493
- 28.7 match ip next-hop 495
- 28.9 match local-preference 497
- 28.10 match metric 498
- 28.11 match origin 499
- 28.12 match route-type 500
- 28.13 match tag 501
- 28.14 set aggregator 502
- 28.15 set as-path 503
- 28.16 set atomic-aggregate 504
- 28.17 set comm-list delete 505
- 28.18 set community 505
- 28.19 set dampening 507
- 28.20 set extcommunity 508
- 28.21 set ip next-hop 509
- 28.22 set local-preference 510
- 28.23 set metric 510
- 28.24 set metric-type 511
- 28.25 set origin 512
- 28.26 set originator-id 513
- 28.27 set tag 514
- 28.28 set vpnv4 next-hop 515
- 28.29 set weight 516
- 28.30 show route-map 517
- 28-30 518
- 29 VPLS Commands 519
- Switch (config-vpls)# 521
- 29.5 vpls-description 522
- 29.9 vpls-peer 524
- 29.13 mpls-vpls 527
- Switch# show mpls vpls 529
- 30 MPLS OAM Commnands 532
- 30.4 traceroute mpls ipv4 536
- 30.6 traceroute mpls l3vpn 538
- 31 QoS Commands 540
- 31.3 qos map cos-pri-color 542
- 31.4 qos map exp-pri-color 542
- 31.6 qos map pri-color-cos 544
- 31.7 qos map pri-color-dscp 545
- 31.8 qos map pri-color-exp 546
- 31.9 show qos map-table all 546
- 31.12 cos 549
- 31.13 trust dscp 549
- 31.14 trust ip-prec 550
- 31.15 trust outer 550
- 31.16 trust port 551
- 31.17 trust cos 551
- 31.18 replace cos 552
- 31.19 replace dscp 552
- 31.20 queue class 553
- 31.21 queue random-detect 553
- 31-15 554
- (drop-probability)/256 554
- 31-16 555
- 31-17 556
- 31.25 queue threshold 557
- 31.26 queue-bandwidth 557
- 31.27 qos statistics queue 558
- 31.29 shape average percent 559
- 31.30 queue shape 560
- 31.31 aggregate-policer 560
- 31.32 class-map 561
- 31.33 match access-group 562
- 31.34 policy-map 562
- 31.35 class NAME 563
- 31.36 trust 563
- 31.37 set priority color 564
- 31.38 policer 565
- 31.39 policer-aggregate 565
- 31.40 port-policing 566
- 31.41 service-policy 567
- 31-29 568
- 31-30 569
- 31.48 show policy-map 570
- 31.51 show class-map 572
- 31.53 show qos interface 573
- 31-35 574
- 32 H-QoS Command 576
- 32.3 total-rate 577
- 32.4 queue-rate 578
- 32.5 queue-weight 579
- 32.7 qos net-egress 580
- 32.8 description 581
- 32.9 total-rate 581
- 32.10 queue-rate 582
- 32.11 queue-weight 583
- 32.14 ethernet evc 585
- 32.15 qos-policy sap-egress 586
- 32.16 qos-policy net-egress 586
- 32-13 588
- 33 ACL Commands 592
- 33.3 permit 593
- 33.4 no sequence-num 594
- 33.5 show access-list arp 594
- 33.6 mac access-list 595
- 33.7 exit 595
- 33.8 no sequence-num 596
- 33.9 deny 596
- 33.10 permit 597
- 33.11 remark 598
- 33.12 mac access-group 599
- 33.13 show access-list mac 600
- 33.15 ip access-list 601
- 33.16 exit 601
- 33.17 no sequence-num 602
- 33.18 deny 603
- 33.19 deny tcp 604
- 33.20 deny udp 605
- 33.21 deny icmp 606
- 33.22 deny igmp 606
- 33.23 permit 607
- 33.24 permit tcp 608
- 33.25 permit udp 609
- 33.26 permit icmp 610
- 33.27 permit igmp 611
- 33.28 remark 611
- 33.29 ip access-group 612
- 33.30 show access-list ip 613
- 33.31 time-range 613
- 33.32 absolute 614
- 33.33 periodic 614
- 33.34 show time-range 615
- 34 ARP Inspection Commands 616
- 34.4 ip arp inspection trust 618
- 34.6 ip arp inspection vlan 620
- 34.8 show ip arp inspection 622
- 35 IP Source Guard Commands 625
- 35.3 ip verify source 626
- 35.4 show ip source binding 627
- 36 DHCP Snooping Commands 628
- 36.3 dhcp snooping binding 629
- 36.7 dhcp snooping trust 633
- 36.8 dhcp snooping verify 633
- 36.9 dhcp snooping vlan 634
- 37 IEEE 802.1x Commands 638
- 37.3 dot1x port-control 639
- 37.4 dot1x protocol-version 640
- 37.5 dot1x quiet-period 640
- 37.6 dot1x reauthentication 641
- 37.7 dot1x re-authenticae 642
- 37.8 dot1x timeout 642
- 37.9 radius deadtime 643
- 37.10 radius-server host 644
- 37.11 radius retransmit 645
- 37.12 radius timeout 646
- 37.13 show dot1x 647
- 38.1 aaa new-model 648
- 38.2 no aaa new-model 648
- 38.8 show aaa status 652
- 39 File Operation Commands 654
- 39.3 delete 655
- 39.4 dir 656
- 39.5 ls 657
- 39.6 more 658
- 39.7 mkdir 658
- 39.8 rename 659
- 39.9 rmdir 660
- 39.10 tar create 660
- 39.11 tar table 661
- 39.12 tar xtract 662
- 39.13 copy running-config 662
- 39.14 copy startup-config 663
- 39.15 copy tftp:// 663
- 39.16 show running-config 664
- 39.17 show startup-config 666
- 39.18 write 666
- 39.19 write memory 667
- 39.20 write terminal 667
- 39.21 ftp 667
- 39.22 ftp username 668
- 39.23 ftp password 669
- 39.24 ftp passive 670
- 39.25 show ftp 670
- Switch# 671
- 40.1 show version 672
- 40.2 ip ssh server 672
- 40.8 ip ssh server version 676
- 40.11 rsa key 678
- 40.12 key format 679
- 40.13 key string end 679
- 40.14 key type 680
- 40.15 reset 680
- 40.16 validate 681
- 40.17 KEYLINE 681
- 40.18 rsa key export 682
- 40.19 rsa key import 683
- 40.20 show rsa key 683
- 40.21 show rsa keys 684
- 40.22 clock set datetime 685
- 40.23 clock set timezone 685
- 40.24 clock set summertime 686
- 40.25 show clock 687
- 40.26 ntp ace 688
- 40.27 ntp authentication 689
- 40.28 ntp broadcast client 690
- 40.29 ntp key 690
- 40.30 ntp interface reload 691
- 40.31 ntp peer 691
- 40.32 ntp refclock 692
- 40.33 ntp server 693
- 40.34 ntp trustedkey 694
- 40.35 show ntp 695
- 40.36 show ntp association 695
- 40.37 show ntp key 696
- 40.38 show ntp status 696
- 40.39 show ntp statistics 697
- 40.41 show environment 699
- 40.44 show memory 702
- 40.45 show network services 704
- 40.48 show file system 707
- 40.49 debug arp 708
- 40.50 debug dhcp relay 709
- 40.51 debug dhcp snooping 709
- 40.52 debug igmp 710
- 40.53 debug stp 711
- 40.54 debug ospf 711
- 40.55 debug pim sparse-mode 712
- 40.56 show debugging 713
- 40.57 ping 714
- 40.58 traceroute 714
- 40.59 boot system 715
- 40.60 reload 716
- 40.61 schedule reboot at 716
- 40.62 schedule reboot delay 717
- 40.63 show boot 717
- 40.64 show boot images 718
- 40.65 clear logging buffer 719
- 40.66 logging alarm-trap 719
- 40.67 logging file 720
- 40.68 logging level file 720
- 40.69 logging level module 721
- 40.70 logging merge 722
- 40.71 logging operate 723
- 40.72 logging server 723
- 40.73 logging server address 724
- 40.76 logging timestamp 727
- 40.77 show logging 727
- 40.78 show logging buffer 728
- 40.79 show history 729
- 40.80 clear line vty 730
- 40.81 re-username 730
- 40.82 username 731
- 40.83 show users 732
- 40.84 show usernames 732
- 40.90 show mac address-table 736
- 41 Mirror Commands 739
- 41.4 show monitor 741
- 42 DHCP Relay Commands 742
- 42.9 serveice dhcp 747
- 42.10 show dhcp-server 748
- 43 DNS Commands 752
- 43.3 dns server 753
- 43.4 show dns 754
- 43.5 show ip host 754
- 44 SNMP Commands 756
- 44.2 snmp-server community 757
- 44.3 snmp-server context 757
- 44.4 snmp-server enable 758
- 44.5 snmp-server engineID 759
- 44.6 snmp-server group 759
- 44.7 snmp-server notify 760
- 44.12 snmp-server usm-user 763
- 44.13 snmp-server version 764
- 44.14 snmp-server view 765
- 44.25 show snmp-server view 772
- 45 Sflow Commands 773
- 45.3 sflow counter interval 774
- 45.4 sflow counter enable 774
- 45.5 sflow sample rate 775
- 45.6 sFlow sample enable 776
- 45.7 show sflow 777
- 45.8 debug sflow 777
- 45.9 show debugging sflow 778
- Switch#show debugging sflow 779
- 46.1 reload 780
- 46.2 reload SLOT 780
- 46.3 ha switchover 781
- 46.4 line card SLOT 781
- 46.5 card-type 782
- 46.6 temperature 783
- 46.7 management ip address 783
- 46.9 show supervisor 784
- 46.10 show linecard 785
- 46.11 show version 786
- 46.12 show switchover 786
- 46.13 show environment 787
- 46.14 show transceiver 788
- CANOGA PERKINS CORPORATION 790
Související produkty a manuály pro Počítačový hardware Canoga-perkins 9175 Command Reference
Počítačový hardware Canoga-perkins 9145E Network Interface Device Quick Start Guide Uživatelský manuál
(7 stránky)
(7 stránky)
Počítačový hardware Canoga-perkins 9145EMP Interface Device Quick Start Guide Uživatelský manuál
(7 stránky)
(7 stránky)
© 2020, manymanuals.cz. Všechna práva vyhrazena. | 0.044 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Komentáře k této Příručce