Canoga-perkins 9145E10G Network Interface Device Hardware Uživatelský manuál stáhnout pdf (Strana 20)

9145E10G Ethernet Network Interface Device User’s Manual Functional Description

Management Ports

2.4 Management Ports

2.4.1 EIA-232 Console Port

The console port of both 9145E10G models are used for communication between the 9145E10G

and a VT100 terminal or emulator. The console port is a DE-9 female connector with a DCE pin-

out, which can be directly connected to a terminal with a straight through cable (see Figure 2-4).

Figure 2-3. EIA-232 Console Port Pinouts

2.4.2 Ethernet Management Port

The Ethernet Management port is used for remote management of the 9145E10G-527. The eth-

ernet management port has a management interface with an RJ45 UTP connector. The manage-

ment port can sense and automatically cross-over the Tx and Rx pairs.

The UTP port is IEEE 802.3 compliant for 10BASE-T and 100BASE-TX and supports the follow-

ing modes of operation:

• 10 Auto

• 100 Auto

12345

6789

TO CRAFT PORT

DCE

DE9 FEMALE

12345

6789

TO PC SERIAL PORT

DTE

DE9 MALE

DCD

RX DATA

TX DATA

DTR

SIG GND

DSR

RTS

CTS

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 54 55

Žádné komentáře

Canoga-perkins 9145E10G Network Interface Device Hardware Uživatelský manuál Strana 20